Kerio PC Protection Firewall Configuration

To Setup your Kerio PC Protection Firewall to work with SightSpeed please follow the instructions below:

1. Start Kerio PC Protection Firewall. In the upper left corner, click on the menu entry Admin.

2. On the tab labeled Firewall click on the Advanced button. This will open up another configuration page with set of rules already known to the firewall. On the tab labeled Filter Rules, in the lower left corner click on the Add button, to add anew rule to the firewall. Once this is accomplished proceed to step 3.

 
3. Fill out this page using the screen shot above and then click Ok until you have returned to the main application.

Configure the SightSpeed Video Conference Receive Port

1. Open the SightSpeed client, and select Options -> Preferences
2. In the Preferences Wizard, advance to Network (Step 2 of 5)
3. In the Network section, click on the Advanced button
4. Under IP info, set the Receive Port to the corresponding port you set in step 2 of the Add SightSpeed as a Service section.
5. Click Finished and Restart SightSpeed Video Conferencing

You are now configured to use SightSpeed through your firewall, and free to see.

If you have any further questions, please contact support